Click To Call(689) 356-0104Click To Get A Free Estimate
Orange rust arc and dark oil drips on a gray paver driveway beside a sprinkler head

Lift rust, oil, leaf and algae marks from pavers

Paver Stain Removal in Altamonte Springs, FL

Call (689) 356-0104 for a free paver stain removal estimate at your Altamonte Springs home.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 356-0104
Stain removal

Who removes paver stains in Altamonte Springs, and how quickly do they reply?

A local contractor treats paver stains at homes all over Altamonte Springs, FL, and a reply arrives within one business day, frequently within hours. The look at your pavers and the estimate are free, and nothing is owed if you pass. To get started, call (689) 356-0104.

A stain is not one problem. Rust, oil, leaf tannins and algae each need a different treatment, and the wrong one can set the mark deeper or damage the paver. A contractor names the stain first and then picks the product, which keeps the pavers from taking more damage. Describe the color and the spot when you ask for a free quote.

Call (689) 356-0104

Orange sprinkler arc on pale pavers with a rust treatment brushed onto one section of the surface
Stain types

What kinds of stains do Altamonte Springs pavers get?

Five types show up again and again around Seminole County homes: rust, oil, leaf and organic marks, algae and mildew, and white salt haze. Knowing which one you have saves a visit. To work out which you are dealing with, call (689) 356-0104.

Rust and orange sprinkler streaks

Rust comes from water crossing oxidizing metal or from iron in irrigation water. UF/IFAS says most Florida well water is high in iron and that orange streaks on buildings often follow irrigation with it. The marks repeat in the same arc each time the zone runs. Point out where yours sit when you ask for a free quote.

Oil and tire marks

Oil drips from parked cars soak into the paver and leave dark spots under the bumper line. Unilock says to treat vehicle oil quickly, since an old spot is harder to lift. An Orlando cleaning company says old oil and rust may lighten without disappearing completely. To have yours judged, call (689) 356-0104.

Leaves, berries and other organic marks

Oak leaves, berries and bird droppings leave tea-colored tannin stains, especially where a patio sits under a tree. Unilock says organic stains such as leaves and algae are easier to remove than most. Shade and damp keep them coming back. To plan a treatment, ask for a free quote.

Algae and mildew

A Central Florida sealing company says shaded patios collect more mold and algae, and an Orlando cleaning company says afternoon storms, oak shade and sprinkler spray keep driveways damp. Green or black film also makes a surface slick. To book a treatment, call (689) 356-0104.

White haze on newer pavers

Efflorescence is a white mineral film. Unilock says it often fades on its own and that a remover can speed it up, and Western Interlock says rain removes it over time. Newer pavers usually show it first. Mention your install date when you ask for a free quote.

What is included

What is included in paver stain removal?

A job starts by identifying each stain, then treats each one on its own terms. Most visits finish with a rinse and a check. To go through the steps for your pavers, call (689) 356-0104.

Identify the stain

Rust, oil, tannin, algae and salt haze each get a name before any product is chosen.

Treat on a test spot

Stronger products are tried on a small, hidden spot first, as Unilock advises, so color and finish are not hurt.

Pre-treat, then wash

An Orlando cleaning company pre-treats stains where it helps and then runs a rotary surface cleaner, a steadier pass than a handheld wand.

Rinse and protect the surroundings

Plants, metal gates and rails near the work are covered or rinsed, since acid can promote rust on galvanized or powder coated metal.

Check and repeat

Some marks need a second pass, and the contractor tells you what to expect for the rest.

Will the stains come out completely?

Fresh marks usually come out far more than old ones, and some will fade without vanishing. An Orlando cleaning company says algae, mildew and dirt come up well, while deep oil and rust may lighten without disappearing completely. Unilock explains that pavers have fine capillaries that can trap liquids, so time matters. Ask the contractor what result is realistic when you ask for a free quote.

A contractor who sets the right expectation at the quote is a good sign. If a company promises every mark will vanish, ask how. To compare answers from two companies, call (689) 356-0104.

Cleaning mistakes

What can go wrong when stains are cleaned the wrong way?

A fast fix can leave a new problem. Western Interlock says not to go above about 2,000 PSI, because strong pressure can pull out aggregate, and it warns that muriatic acid can promote rust on galvanized or powder coated metal nearby. Unilock warns that wire brushes can leave metal particles that rust. These are reasons to hire it out. To ask a contractor how the job is done, call (689) 356-0104.

Why do joints need sand after washing?

Water at pressure empties the joints, and loose joints let pavers shift and weeds in. Western Interlock says to add sand back into the joints after washing. Unilock says to spray at an angle no greater than 30 degrees to avoid washing out joint material. Ask whether sand is included when you ask for a free quote.

When is the spot test worth it?

Every time a stronger product is used. Unilock recommends testing an efflorescence remover or an alkaline cleaner on an out-of-sight spot first. A test patch costs a few minutes and avoids a ruined corner. To ask for one, call (689) 356-0104.

Does sealing stop new stains from sticking?

It slows them. Unilock says a sealer helps keep a paver's color and limits spills from penetrating, which gives you time to wipe a spill before it sets. A Central Florida company warns that sealing over dirty pavers traps stains for good, so the stain comes out first. It does not stop rust from a sprinkler arc, which is why the water source matters. To ask about a coat after the treatment, ask for a free quote.

Pricing

What does paver stain removal cost in Altamonte Springs?

No page found lists a price for stain removal on its own. The pieces that are published fit together instead. An Orlando company quotes $200 to $250 for most driveway and patio cleaning jobs and a $200 minimum, and an Orlando paver company lists washing alone at $0.15 to $0.75 per square foot. For a price on your stains, ask for a free quote.

Stain treatment is usually added to the wash price, because rust and oil take extra time and product. A clean, sand and seal runs $1.50 to $3.00 per square foot, and the stain work is billed as its own line. Holding a bid already? Call (689) 356-0104 and compare it with these figures.

Piece of the jobPublished figureWhere it comes from
Washing alone$0.15 to $0.75 per sq ftPaver Sealing Orlando FL cost page
Driveway or patio cleaning, most jobs$200 to $250Pressure Hero, Orlando
Smallest job a company takes$200 minimumPressure Hero, Orlando
Clean, sand and seal$1.50 to $3.00 per sq ftCastle Clean and Seal and Paver Sealing Orlando FL
Strip failed sealer firstAdds $500 to $1,000Castle Clean and Seal

No company page found lists stain removal on its own, so this table uses published pieces: washing, cleaning minimums, sealing and stripping, all read in November 2026. Deep oil and rust treatment is usually quoted as an add-on after the contractor sees the marks.

Get a Free Estimate

Contractor rinsing a rust-treated section of a paver walkway with a surface cleaner beside azaleas
Why choose us

Why hire a contractor who works in Altamonte Springs for stain removal?

A contractor who works in this part of Seminole County sees the same marks weekly: iron streaks from irrigation, oak tannins, algae on shaded patios. That experience shortens the guesswork. Ask for the stain type, the product and the price in writing. The call stays yours. To begin, call (689) 356-0104.

Contractors who work around here

A company that covers Altamonte Springs already plans for afternoon storms and sprinkler schedules. The first visit goes smoother for that.

A free look, nothing owed

The visit and the estimate cost nothing. If the number does not fit your budget, thank the contractor and move on.

Numbers you can check

Orlando-area companies post their price per square foot, and this site lays those ranges out in plain figures. If a quote lands well outside those ranges, ask why.

You decide the pace

Get the price in writing and read it twice. Read the contractor standards page for what to confirm before you sign.

Ready for a free paver stain removal estimate?

Phone or fill in the short form, and a local contractor responds within one business day, often much sooner.

Call (689) 356-0104

Free, no obligation

Homeowner and contractor looking at an oil stain beside a garage door on a brick paver apron
Photos

What do paver surfaces look like after stain treatment around Altamonte Springs?

Wide freshly sealed herringbone paver driveway at a split-level home under a live oak after a stain treatment at a Seminole County home
Family on lounge chairs by a sealed gray paver pool deck with a spa after a stain treatment at a Seminole County home
Sealed paver patio with wicker chairs beside a screened porch and a lake view after a stain treatment at a Seminole County home
Sealed paver walkway curving through azalea beds to a brick front entry after a stain treatment at a Seminole County home
Close view of new concrete pavers after sealing after a stain treatment at a Seminole County home
Paver driveway with one cleaned half beside a stained half after a stain treatment at a Seminole County home
Contractor rinsing a paver driveway with a pressure washer after a stain treatment at a Seminole County home
Two contractors spraying and rolling sealer on a driveway after a stain treatment at a Seminole County home
How it works

What is the paver stain removal process, step by step?

Most jobs follow the same five steps, from naming the stain to the final check with you. To set a date, call (689) 356-0104.

Steps 1 and 2: name it and treat it

The contractor finds each stain and picks a product made for it, trying anything strong on a hidden spot first. The treatment then sits for the time the product needs. To get a stain named, ask for a free quote.

Steps 3 to 5: rinse, check and seal if wanted

The surface is rinsed, and the contractor checks the result and repeats where a mark remains. If you want a coat, it goes on once the pavers are fully dry. Ask how many passes are planned when you call (689) 356-0104.

Questions

Frequently Asked Questions

How can I remove stains from my pavers?

It depends on the stain. Unilock sorts them into organic marks such as leaves and algae, oil, rust, mildew and white efflorescence, and each one has its own treatment. Fresh spills come out far more easily than set ones, since Unilock says pavers have fine capillaries that can trap liquids and let stains settle deeper. A contractor identifies the stain first, then picks the product.

What should a contractor avoid when cleaning pavers?

Avoid heavy pressure and harsh acid. Western Interlock says not to go above about 2,000 PSI, because strong pressure can pull out aggregate. It also warns that muriatic acid can promote rust on galvanized or powder coated metal nearby. Unilock adds that wire brushes can leave metal particles that rust later.

What should I ask a contractor before a paver stain removal job?

Ask which stain the contractor sees on your pavers, since rust, oil and algae each get a different product. Ask whether the old marks are expected to lighten or vanish, and whether stain treatment is a separate line on the estimate. Also ask when joint sand and any sealer would go back on.

Is it a good idea to pressure wash pavers?

Yes, with care. An Orlando cleaning company says it adjusts pressure on pavers so the joint sand is not blown out. Western Interlock keeps its limit near 2,000 PSI. Unilock says to spray at an angle no greater than 30 degrees. After washing, joints often need fresh sand.

Why are there orange streaks on my pavers near the sprinklers in Altamonte Springs?

Iron is the usual cause. UF/IFAS says most Florida well water is high in iron and that orange streaks on buildings often follow irrigation with it. The marks sit in an arc where the sprinkler lands. A rust treatment lifts them, and they need to come off before any sealer goes on.

Will oil stains come out of my pavers completely?

Not always. An Orlando cleaning company says old oil that has soaked deep and rust may lighten without disappearing completely, and it tells customers what to expect at the quote stage. Fresh oil lifts more easily, so call soon after a leak.

How much does paver stain removal cost in Altamonte Springs?

No page found lists stain removal by itself. An Orlando company quotes $200 to $250 for most driveway or patio cleaning jobs, with a $200 minimum, and an Orlando paver company lists washing alone at $0.15 to $0.75 per square foot. Stain treatments are often priced as an add-on, so ask for a separate line.

Should I seal pavers after the stains are gone?

Many homeowners do. Unilock says a sealer helps keep color and limits spills from penetrating, while Castle Clean and Seal notes that sealing over dirty pavers traps stains for good. That is why the stain comes out first. Sealing is optional, and an Orlando paver company lists a coat at two to four years.

Ask which stain is on your pavers

Tell a contractor where the mark is and what color it is, and a reply comes within one business day, usually much sooner.

Call (689) 356-0104

Free, no obligation