
Brighter pavers with clean, packed, freshly sanded joints
Paver Cleaning and Joint Sand in Altamonte Springs, FL
Ask for a free estimate to clean and re-sand your Altamonte Springs pavers by calling (689) 356-0104.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can I get my pavers cleaned in Altamonte Springs without a long wait?
A local contractor can clean pavers across Altamonte Springs, FL, and you will hear back within 1 business day, usually much sooner. Fresh joint sand is part of the job, and the free estimate comes with no pressure to book. To begin, call (689) 356-0104.
Cleaning lifts algae, dirt and stains so pavers look brighter and grip better underfoot. New sand then packs the joints, so the pavers hold still and weeds find less room. The shaded back patio that went dark over the summer can match the rest of the yard again. Point out the worst spots when you ask for a free quote.
Paver Sealing Altamonte Springs Is Proud to Serve Central Florida

What is part of a paver cleaning job?
Expect algae treatment, a gentle wash and new joint sand once everything dries. You can book it by itself or as stage one of sealing. Shaded patios, spots near sprinkler heads and walks under oaks usually take the most time. To line up a cleaning, call (689) 356-0104.
Algae and weed treatment
A treatment goes on first so mold, algae and weeds die back at the root before the wash.
Gentle wash
A surface cleaner at low pressure gives an even pass without blasting sand out of the joints.
Fresh joint sand
Sand is swept in and wet down after the pavers dry, then topped off once it settles.
Sealer if you want it
A coat can go on once everything is fully dry. The sealing guide covers what it adds.
What are the signs my pavers need cleaning?
Look for a green or black film along shaded edges, orange marks near sprinkler heads, weeds in the joints, white chalky patches and sand on the driveway after rain. Algae matters most, since a slick walk or pool deck is a fall risk. To have yours looked at, call (689) 356-0104.
Is a cleaning enough, or should I seal my pavers too?
A cleaning fixes how pavers look today, and sealer decides how long that look lasts. Stopping at a cleaning costs less now, but algae, rust marks and fading return on their own schedule. A sealed surface is easier to wash the next time and needs a new coat in a few years. Say which you want when you ask for a free quote.
How often should Altamonte Springs pavers be cleaned?
An Orlando paver company suggests a maintenance cleaning every 12 to 15 months to stretch the life of a coat. Shaded patios and walks under oaks may need attention sooner than an open driveway. Orlando gets over 50 inches of rain a year, according to the same company, so damp spots do not dry out for long. To plan cleaning dates around your yard, call (689) 356-0104.
Does a harder blast clean pavers better?
No. Western Interlock says not to go above about 2,000 PSI, especially on new pavers, because stronger pressure can pull out larger aggregate. A hard blast also empties the joints, which is why sand goes back in afterward. Ask what pressure and what attachment the contractor plans to use when you ask for a free quote.
A surface washer attachment spreads the force across two heads and rides close to the ground, which gives a steadier result than a bare wand. Unilock describes a fanned nozzle at a low setting for a similar reason. The way a contractor answers shows how careful the work will be. To ask both questions now, call (689) 356-0104.
Why do my pavers turn orange near the sprinklers?
Most often it is iron. UF/IFAS says most Florida well water is high in iron and that orange streaks on buildings often follow irrigation with it. Those marks sit in the same arc each time the zone runs, and they need a rust treatment before any sealer goes on. Western Interlock warns that muriatic acid can promote rust on galvanized or powder coated metal nearby, so ask how the contractor protects gates and rails. Point out the marks when you ask for a free quote.
Why does algae keep coming back under the oaks?
Shade and damp ground keep a surface wet, and a Central Florida sealing company says covered or partly shaded patios collect more mold and algae. Orlando averages over 50 inches of rain a year, so the surface rarely stays dry for long. A treatment kills growth at the root, and sealing afterward makes regrowth easier to rinse off. To plan a treatment, call (689) 356-0104.
Why are white patches showing on newer pavers?
White chalky patches on newer pavers are usually efflorescence, which is salt that works its way to the surface. Unilock says the film usually fades within two to three months, though it can last up to a year, and sealer should wait until it is gone. Cloudy old sealer can look similar. Point to the spot when you call (689) 356-0104.
Which paved areas can be cleaned at an Altamonte Springs home?
Any paved area around the house can be cleaned, including the driveway, pool deck, patio and front walk. Each one collects a different kind of grime, so the product and the method change. To start with yours, ask for a free quote.
Driveways
Tires, oil drips and afternoon sun hit the driveway first. Cleaning here counts most where cars turn and joints work loose.
Screened pool decks
Splash water, chlorine and bare feet wear on pool pavers every day. Cleaning a deck should leave the surface with good footing.
Lakeside and shaded patios
A back patio under oaks or near a lake stays damp and catches leaves. Those spots usually take the most scrubbing.
Front walks and entries
Entry walks collect soil, mulch and drips from planters by the door. Cleaning the front walk is a small job, yet it is the first surface a guest steps on.
What leaves Altamonte Springs pavers looking dirty?
Storm sand loss, orange sprinkler streaks, green film in shade, sun fading and cloudy old sealer lead the list. A cleaning handles several of them, and sealing or repairs handle the rest. To see which of these match your property, call (689) 356-0104.
1. Afternoon storms and lost sand
Orlando gets over 50 inches of rain a year, according to a local paver company, and summer storms arrive most afternoons. Heavy rain carries sand out of the joints, and pavers start to shift once the gaps run low.
2. Orange streaks from irrigation
UF/IFAS says most Florida well water is high in iron, and orange streaks on buildings often follow irrigation with it. Streaks near sprinkler heads need a rust treatment before any coat goes on.
3. Green film on shaded patios
A Central Florida sealing company says covered or partly shaded patios collect more mold and algae. Under oaks or a screen cage, the film comes back sooner.
4. Fading on open driveways
A driveway with no shade takes sun from morning to evening, and chalky color is the first sign. A wash shows how much color is left.
5. Old sealer that turned cloudy
A Central Florida company says solvent-based sealer can turn white and peel in humid weather. Failed sealer has to come off first, which usually adds $500 to $1,000 or more.
What does paver cleaning cost in Altamonte Springs?
An Orlando paver company lists washing alone at $0.15 to $0.75 per square foot. That puts a 600 square foot driveway at about $90 to $450 and a 1,000 square foot pool deck at about $150 to $750. Stain treatment, joint sand and repairs are often priced apart from the wash, so compare what each quote includes. For a price on your property, ask for a free quote.
Planning to seal as well? Ask for one combined price. For a clean, sand and seal combined, Orlando-area companies list $1.50 to $3.00 per square foot. To compare the two jobs, call (689) 356-0104.
Want a protective coat as well? The sealing guide explains it, and the service areas page names every town covered. Or return to paver sealing in Altamonte Springs.
| Paved area | Cleaning alone | Clean, sand and seal |
|---|---|---|
| 400 sq ft | $60 to $300 | $600 to $1,200 |
| 800 sq ft | $120 to $600 | $1,200 to $2,400 |
| 1,200 sq ft | $180 to $900 | $1,800 to $3,600 |
The cleaning column multiplies the $0.15 to $0.75 per square foot an Orlando paver company lists for washing alone. The last column uses the $1.50 to $3.00 per square foot Orlando-area companies published, read in November 2026. Bigger areas often price lower per foot, and a company may set a project minimum.

Why use a contractor who works in Altamonte Springs for paver cleaning?
A contractor who works in this part of Seminole County knows what iron in irrigation water, shade and afternoon storms leave behind. You can hold the quote up against the published rates on this page and decide in your own time. To begin, ask for a free quote.
Contractors who work around here
A company that covers Altamonte Springs already plans for afternoon storms and sprinkler schedules. The first visit goes smoother for that.
A free look, nothing owed
The visit and the estimate cost nothing. If the number does not fit your budget, thank the contractor and move on.
Numbers you can check
Orlando-area companies post their price per square foot, and this site lays those ranges out in plain figures. If a quote lands well outside those ranges, ask why.
You decide the pace
Get the price in writing and read it twice. Read the contractor standards page for what to confirm before you sign.
Want a free estimate to clean your Altamonte Springs pavers?
Fill in the short form or phone, and a contractor responds within 1 business day, usually much sooner.
Free, no obligation

What do cleaned pavers look like around Altamonte Springs?








How does the paver cleaning process go, step by step?
If sealer is not part of the job, the work stops after step four, when the joints are full. To set a date, call (689) 356-0104.
1. Walk and measure
The contractor walks the pavers and measures the area for the cleaning quote. Dips, loose pavers, old sealer and standing water all get noted.
2. Treat and wash
Algae and weeds get a treatment first. A low-pressure wash follows, with a surface cleaner held close to the pavers so the joint sand stays in place.
3. Handle the stains
Rust, oil, leaf marks and white salt film each get a product made for that stain, tried on a small spot before the rest.
4. Pack the joints
Sand is swept in and wet down so it compacts. A second sand pass follows once the pavers have dried.
5. Seal and walk it with you
When sealer is part of the job, it goes on dry pavers with a sprayer and a roller. The contractor then shows you the finished area and how long to keep feet and cars off.
Frequently Asked Questions
Is it necessary to seal pavers in Florida?
Not for every job. A wash and fresh sand can stand on their own, but bare pavers keep facing sun, storms and humidity, so green film and lost sand tend to return sooner. Sealing adds a coat that slows that and makes the next wash easier, at the price of a repeat job every few years.
How can I check a company before it washes my pavers?
Rules depend on the work, so ask the company which license or registration covers it, especially if repairs are planned. You can look up a company by name in the Florida Department of Business and Professional Regulation license search.
What should a contractor avoid when cleaning pavers?
Avoid heavy pressure and harsh acid. Western Interlock says not to go above about 2,000 PSI, and a surface washer attachment gives a steadier pass than a bare wand. It also warns that muriatic acid can promote rust on galvanized or powder coated metal nearby.
How long does paver sealing last in Florida?
Two to four years is the span an Orlando paver company gives. Cleaning every 12 to 15 months helps a coat last, according to the same company. Full sun and daily car traffic push it toward the short end.
How much does paver cleaning cost in Altamonte Springs?
An Orlando paver company lists washing alone at $0.15 to $0.75 per square foot. A 600 square foot driveway would run about $90 to $450. Joint sand, stain treatment and repairs are often priced apart, so compare what is included.
Why do my Altamonte Springs pavers turn orange near the sprinklers?
Iron is the usual cause. UF/IFAS says most Florida well water is high in iron, and orange streaks on buildings often follow irrigation with it. A rust treatment lifts the streaks, and they need to come off before any sealer goes on.
Should pavers be cleaned before sealing?
Yes. A Central Florida sealing company says sealing over dirty pavers traps stains for good. The wash comes first, then fresh sand, then sealer on a dry surface.
How long do pavers need to dry before sealing?
About a day in shade and a few hours in warm sun, according to Unilock. Unilock also asks for at least 24 hours after cleaning and 24 hours after fresh joint sand. A rainy forecast can push the date back.
Pick a day to freshen your Altamonte Springs pavers
Use the short form or phone, and a local contractor gets in touch within 1 business day, usually much sooner.
Free, no obligation
