
Paver sealing for Conway homes
Paver Sealing in Conway, FL
For Conway pool decks and lake walks that need good footing, a free sealing estimate starts when you call (689) 356-0104.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Conway
Paver sealing is available across Conway, from the streets near the lake chain to the blocks along Conway Road and Anderson Road. A local contractor washes the pavers, replaces the joint sand and applies the sealer, and the estimate is free. To hear back within 1 business day, usually much sooner, call (689) 356-0104.
Picture the walk from the back door to the pool deck after a wet summer: dark patches, a slick spot by the steps, joints half empty. After a wash, fresh sand and a coat chosen for grip, the same path looks even and feels steadier underfoot. When you are ready, you can ask for a free quote and say where the footing worries you.

Why hire a local paver sealing contractor in Conway?
Conway homeowners pick a local paver contractor because wet decks, lake walks and quiet front paths each call for a different finish. Someone who works here knows to ask where you walk barefoot and where you carry groceries, so ask for a free quote.
Free look at your walks
The contractor checks your Conway pool deck, driveway and walks at no charge. You hear the price before you agree to anything.
A range for comparing bids
Central Florida companies publish $1.50 to $3.00 per square foot for a full clean, sand and seal. Hold any Conway bid up to that range.
A finish picked for grip
Matte and penetrating finishes keep more traction when wet, and a sample on a spare paver shows the look before the job starts.
You stay in charge
You choose the finish, the day and whether to go ahead. A Conway estimate carries no obligation to hire anyone.
Get Your Free Estimate in Conway
Tell us about your pavers in Conway.
Free, no obligation

What paver problems show up most in Conway?
Slick spots around the pool and steps
Two Orlando-area companies disagree on the fix, and that is useful to know. One says a glossy film-forming sealer on a pool deck can trap moisture and create a slip hazard, so it adds a non-slip additive. Another says the right sealer keeps natural traction and that over-applied or mismatched sealer causes slipperiness. Ask any Conway contractor which approach they take. A test patch walked on while wet answers the question better than any brochure.
Walks that every age shares
Conway's median age was 42.5 in 2020, and 17.3 percent of residents were 65 or older. About 9 percent of households were someone 65 or older living alone. That makes the front walk, the path to the mailbox and the steps to the lanai matter more, since a slippery or uneven walk is a daily risk, not a rare one. Ask the contractor to look at steps, ramps and curb cuts first, since small changes in height are where footing fails.
Screened pools on 1970s and 1980s lots
A local broker says contemporary ranch homes from the 1970s and 1980s are cinder block with screened pools. A pool means splash, chlorine and sun on one surface. One Orlando company says pool decks under spray may need resealing every two to three years, and a travertine deck needs a different sealer from brick or concrete pavers. Mention the pool when you call so the deck is measured and priced as its own area.
Joint sand that rain keeps taking
Orlando's summer storms move loose sand out of the joints, and open joints let pavers shift under a foot. A Florida paver company says polymeric sand helps prevent washout in heavy rain, which is one reason sand goes back after every wash. Low joints near the steps are a good sign the walk is due. A walk with low joints and a few rocking pavers is a good candidate for a re-sand before any coat goes on.
A coat from a past owner
Most Conway homes were built between 1960 and 1990, so the pavers have probably been through more than one owner. A past owner may have used a gloss product that now feels slick when wet. A water-based coat will not bond over a solvent-based one, so the old coat is checked before a new one is picked. Any old receipt or product label you can find helps settle it quickly.
Does a lake street in Conway need a different sealing plan?
Yes, a little, because wet footing is the bigger worry near water. Conway is 4.70 percent water, and the Conway chain is three connected lakes joined by canals. A path that stays damp near the lake needs a finish with grip. Give your street name when you ask for a free quote.
A local broker names Conway Place, Lake Conway Woods, Lake Margaret Corridor, Gatlin Heights and the Conway Road Corridor as sub-areas. Lake Conway Woods has a private lakefront park with a community dock, which means shared walks may fall under its small association. Most other Conway neighborhoods have no association, so the owner makes the call. Call (689) 356-0104 and name your sub-area.
Lots in Conway usually run 8,000 to 15,000 square feet or more, so driveways and pool decks can be large. Mature oak and pine canopy of 40 to 60 years shades many yards, and shade slows drying. If your pavers sit under a canopy, ask for a free quote and ask the contractor to plan for a longer dry time.
What does paver sealing cost in Conway?
Central Florida companies publish $1.50 to $3.00 per square foot for a full clean, sand and seal. In Conway, the size of the area, how much cleaning it needs and any old coat decide where a job lands. A big pool deck and a long driveway add up fast, so ask for each area on its own line. Request a measured price when you ask for a free quote, and the visit is free.
Travertine or other natural stone calls for a different sealer, and one Orlando company says that is why it costs a bit more. A glossy or wet-look finish can also add to the total. A contractor can tell which of these apply before anyone starts. Call (689) 356-0104 to set up a visit.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $450 to $900 |
| 600 sq ft | Two car driveway | $900 to $1,800 |
| 1,000 sq ft | Large driveway or pool deck | $1,500 to $3,000 |
| 1,500 sq ft | Driveway plus pool deck | $2,250 to $4,500 |
Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

How does a paver sealing job work in Conway?
Walk the paths and test for slip risk
The contractor walks your driveway, pool deck and front path and notes where water sits and where feet slip. Surface type matters here, since travertine and brick take different sealers. Earlier sealing matters, since water-based sealer will not bond over a solvent-based coat. You pick the finish with grip in mind. The contractor also asks who uses each area and when, so the plan fits your household.
Wash off film and grime
The wash comes first, which keeps dirt from being sealed in. Dark film, dirt and spill marks come off the deck and walks. Rinse water is kept away from the lake edge and from storm inlets where it can be. A pool deck gets extra care at the edges and near the steps. Algae and film on shaded pavers come off more easily when the surface is wet, so this step often goes first.
Put fresh sand back in the joints
Pavers lose joint sand in the wash, so new sand is brushed in before any sealer. Full joints keep pavers from rocking underfoot and leave less room for weeds. Spare sand is swept away, leaving an even, clean face for the coat. It goes faster than the wash, though the coat depends on it.
Let the surface dry
Sealer needs a clean, dry surface, and shaded Conway yards can take longer to dry. The contractor waits for a dry window and starts early in the day. One Orlando company warns that afternoon humidity or a shower can trap water under a wet-look coat. If a storm builds early, the job waits for another day.
Seal in a thin, even coat
The finish you chose goes on in a thin, even coat. Too much product is what causes whitening and a slippery feel, according to Orlando companies. Water-based sealer is walkable in three to four hours and cured in 24 to 48 hours, so the family stays off until then. The contractor then walks the paths with you and points out any spots to watch for wear.
Complete paver services in Conway
A Conway sealing job runs in one order: wash, re-sand, dry, seal. The wash clears film and grime from decks and walks, and fresh sand locks the pavers so they do not rock underfoot. Sealer goes on last, in a thin coat. To ask how long each stage takes on your property, call (689) 356-0104.
Pool decks, driveways, lanai floors and front walks each get a slightly different plan. Decks and walks near steps care most about grip, while driveways care about tire marks and fading. One Orlando company says natural finishes are often redone every 3 to 5 years. Tell the contractor which areas you want done when you ask for a free quote.
Sealer choice starts with the old coat, then moves to grip and look. Penetrating sealers soak in, keep a matte look and hold traction when wet, according to one Orlando company. Wet-look sealers deepen color but can feel slick if over-applied. Around a Conway pool, ask for a sample patch, then call (689) 356-0104.
Timing in Conway follows the weather. Sealer needs a dry surface, so a date can move when summer storms build in the afternoon. The dry season begins around October 15 on average, and winter dates tend to hold. For a date that fits your household, ask for a free quote.
Questions to ask before you hire
- What is the plan if you find cracked or loose pavers while you are cleaning?
- Will the sealer change the color of my pavers, and can I see it on a spare paver first?
- Can you list the wash, the joint sand, the sealer and the labor as separate lines on the quote?
- Will you reset the pavers that tree roots have pushed up before the sealer goes on?
- My pavers are twenty years old and the color has gone gray. Is sealing still worth it?
- Can the sealer go on around my gate, the mailbox pavers and the strip along my curb?
- Which days do I need to switch off the sprinklers before and after the job?
What do sealed pavers look like around Conway?









Why local matters in Conway
A contractor who works in Conway knows the usual layout: a ranch house on a good-size lot, a screened pool out back and a walk that reaches the lake. That picture tells them where footing matters most. Someone from outside the area may start with the driveway only. To reach a local contractor, call (689) 356-0104.
Local work also means knowing who decides. Most Conway neighborhoods have no association, so you choose the finish, the date and the contractor. Lake Conway Woods is different, with a small association that covers its lake amenity, so a contractor who knows the area asks which side you are on. You can ask for a free quote and mention your street.
The lakes shape the work too. The Lake Conway Water and Navigation Control District was created by state law in the late 1950s, and the chain is three lakes joined by canals. A local contractor keeps rinse water off the shoreline and away from storm inlets. If your yard slopes to the water, call (689) 356-0104 and tell the contractor.
How did Conway and its lakes come to be?
Conway was settled in the 1850s and became a busy place in the early 1900s. The brick Conway Road was one of the first five paved highways in Orange County, running from Orlando along Briercliff Drive and Curry Ford Road to Anderson Road, the center of Conway. If you live near that route, ask for a free quote and tell the contractor which stretch.
The lake chain has its own story. An Orlando Memory interview describes Lake Conway as three connected lakes with canals, and notes that a 1957 state law created the Lake Conway Water and Navigation Control District. Belle Isle, the city that holds Lake Conway, sits about three miles northwest of Orlando International Airport. If you live near one of these places, call (689) 356-0104 and give your street.
Frequently Asked Questions
How often do you seal pavers in Conway, Florida?
Quoted spans run two to five years, and a natural finish can reach three to five. One Florida company says most homeowners reseal every 2 to 3 years. Pool decks and walks that stay damp point toward the short end.
How much is paver sealing in Conway?
Central Florida companies publish $1.50 to $3.00 per square foot for a full clean, sand and seal. A Conway job lands in that range based on area, cleaning and old coat. Ask for each area, such as the deck and the drive, on its own line.
Is sealing pavers a good idea in Conway?
Often yes, especially where decks and walks stay wet. Sealing slows fading and staining, and the right finish can keep footing steady. Pick the finish with grip in mind, and ask for a sample before the full job.
Is there a downside to sealing pavers in Conway?
Yes, a few. Sealer wears away over time, and wet-look finishes show scuffs sooner than matte ones. Over-applied or mismatched sealer can feel slick when wet, so thin, even coats and the right product matter.
What is the average cost to seal pavers in Conway?
Central Florida companies commonly publish $1.50 to $3.00 per square foot. Travertine or other natural stone costs a bit more because it needs a different sealer, one Orlando company says. The measured area on your estimate is the most reliable guide.
Will sealing make my Conway pool deck slippery?
It should not if the right sealer is applied in a thin coat. One Florida company says over-applied or mismatched sealer causes slippery conditions, while another recommends a non-slip additive on glossy products. Ask your contractor which method they use.
Which finish gives the most grip on a Conway walkway?
A matte or penetrating finish usually keeps more traction when wet, according to one Orlando company. A wet look deepens the color but can feel slick if over-applied. Ask for a test patch and walk on it when it is wet.
How soon can I use my Conway walk or pool deck after sealing?
One Orlando company says foot traffic is fine after three to four hours with water-based sealer, and the cure ends within 24 to 48. Keep furniture, pets and sprinklers off until then. A damp morning can push the date.
Can new sealer go over old sealer on my Conway pavers?
Sometimes. Not over a solvent-based coat, since water-based sealer will not bond to it, so the old coat has to be identified. A patchy, peeling or milky surface is a clue. Old receipts or product names help.
Do lake homes in Conway need more cleaning before sealing?
Often they do, if the pavers stay damp or shaded. Dark film and organic buildup come off during the wash, and sealer should only go on a clean, dry surface. The contractor will tell you at the visit how much cleaning your walks need.
Will sealing change the color of my Conway pavers?
It can. A wet look deepens color and adds shine, while a penetrating or natural finish leaves a soft matte look. Ask for a sample on a spare paver so you can see both before you decide.
Do I need homeowners' association approval to seal pavers in Conway?
Usually not, since most Conway neighborhoods have no association, according to a local broker. Lake Conway Woods has a small association, so ask it before you book. Check your own deed or plat to be sure.
Ready for a Free Estimate in Conway?
Call (689) 356-0104 and tell us about your pavers.
Free, no obligation
