Click To Call(689) 356-0104Click To Get A Free Estimate
Sealed brick paver driveway at a home in Longwood

Paver sealing for Longwood homes

Paver Sealing in Longwood, FL

Longwood homeowners can ask exactly what goes on their pavers, so call (689) 356-0104 for a free sealing estimate.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 356-0104
Paver sealing

Fast, careful paver sealing in Longwood

Paver sealing is available across Longwood, and a local contractor gives a free estimate first. The contractor cleans, re-sands and seals driveways, pool decks, patios and walks, and explains each product before it goes on. Dial (689) 356-0104 and expect word back within 1 business day, usually much sooner than that.

Picture a driveway laid years ago, with faded color, thin joints and a few weeds. A wash, fresh silica sand and a sealer matched to the surface can bring it back to one even tone, and the walk to the door looks cared for again. If you want to know exactly what that would mean for your pavers, ask for a free quote and ask for the product list.

Call (689) 356-0104

Family relaxing by a sealed paver pool deck near Longwood
Why hire local

Why hire a local paver sealing contractor in Longwood?

Longwood owners pick a local contractor because homes here range from land platted in 1927 to subdivisions of the late 1960s to new construction since 2020. To ask what suits yours, ask for a free quote.

Free look, product list

The contractor looks at your Longwood pavers at no charge and tells you what products would go on them, step by step.

A range to compare

Orlando-area companies commonly publish $1.50 to $3.00 per square foot to clean, sand and seal. Compare any Longwood bid with it.

Matched to the surface

Matte, semi-gloss and wet look suit different pavers and uses. You choose after hearing what each one does and seeing a sample.

You stay in charge

You pick the date, the finish and whether to go ahead. The estimate carries no obligation, and you can ask every question you like.

Get Your Free Estimate in Longwood

Tell us about your pavers in Longwood.

Call (689) 356-0104

Free, no obligation

Paver joint sand detail on a walkway near Longwood
Common problems

What paver problems show up most in Longwood?

A finish that is hard to change later

A Jacksonville company says wet look sealer is film-forming, semi-gloss enriches color, and natural or matte sealer penetrates and breathes. It adds that changing finishes later means stripping. Water-based sealer also cannot be laid over a solvent-based coat. Picking the finish and base with care at the start spares you a costly change in a few years. Ask the contractor to write down the product names. A change of mind later is possible, but it costs real labor.

Joints that need the right sand

The same company says summer downpours flush polymeric sand out of unsealed joints. A Jacksonville driveway company lists silica joint sand, with colored sand as an upgrade. Low joints let weeds start and let pavers shift. Ask which sand the quote includes, because it holds the pattern together under the sealer. A sand check takes a minute and prevents a repeat visit.

Thirsty pavers that soak up the first coat

A sealer maker's bulletin says coverage depends on the surface's type, age, condition and porosity. A surface that quickly absorbs sealer covers fewer square feet per gallon. Older, dry pavers in Longwood may drink the first coat. That is a reason many companies apply two coats, and a reason to ask how many your quote includes. A short test patch shows how the surface drinks. Ask whether the quote covers extra material for a thirsty surface.

A wet look that shows every scuff

A wet look deepens color, and a Jacksonville company calls it dramatic on tumbled pavers. The same company says it shows wear in drive lanes. For a Longwood driveway that sees daily tires, a semi-gloss or matte coat may age better. Ask to see a sample patch before the whole surface gets one finish. Sun and tires work on a drive together, so weigh both. The same finish on a walkway may look perfect for years.

A coat that is spent but still looks fine

One Florida company says brick pavers are commonly resealed every two to three years. Another puts film-forming sealer at three to five years in Northeast Florida. The bead test helps: water that beads means the coat works, and water that soaks in and darkens the paver means it is done. Test a few spots, including the sunniest corner. If the answer is close, wait a few weeks and test again.

Neighborhoods

What should I ask a contractor about the products going on my Longwood pavers?

Ask four things: the sealer base, the finish, the joint sand and the number of coats. Water-based and solvent-based sealers do not mix, so the old coat decides the base. One Central Florida company applies two coats, and another counts two to three. Put the answers in writing when you ask for a free quote.

The Woodlands grew from tract housing on the old Slade airfield in the late 1960s, while the Longwood Hills land was platted in 1927. Pavers on either side of State Road 434 can be decades old, and a past owner may have used a product nobody remembers. That is why the contractor checks the surface first. Call (689) 356-0104 and give your best guess for the year the pavers were laid.

Longwood has added people quickly, with an estimated 17,089 residents in 2024, up 13.2 percent from the 2020 base. Newer pavers need a wait before the first coat, and a Jacksonville company says 30 to 60 days. Older ones need a check for what is already on top. Call (689) 356-0104 and tell the contractor how new yours are.

Pricing

What does paver sealing cost in Longwood?

Orlando-area companies commonly publish $1.50 to $3.00 per square foot to clean, sand and seal, and a Longwood job lands in that band. Part of the price is the product, since one Central Florida company counts two to three coats of water-based sealer. Old sealer to strip, stained joints and heavy shade add work. To see where yours falls, ask for a free quote.

Pool decks, driveways and long walks are measured together, so a larger layout raises the total even at the same rate. Ask how many coats and what sand the quote includes. Two bids at the same price can hold different products, so compare them line by line. For a written number, call (689) 356-0104; asking carries no obligation.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$450 to $900
600 sq ftTwo car driveway$900 to $1,800
1,000 sq ftLarge driveway or pool deck$1,500 to $3,000
1,500 sq ftDriveway plus pool deck$2,250 to $4,500

Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractors sealing a paver driveway at a home in Longwood
How it works

How does a paver sealing job work in Longwood?

Check the surface and ask about the old coat

The contractor looks for a past sealer, lifted pavers and weak joints. Water-based sealer cannot go over solvent-based, so the old product sets the new one. Sunken areas get reset first. You hear which product and finish are planned for your Longwood pavers. This is also the time to ask about samples. The walk-around usually takes a short visit.

Wash and treat stains

Weeds and green film are treated, then the pavers are washed. Oil and rust from past seasons may lighten without disappearing. The surface then dries before anything else happens. A damp surface should not be sealed, so a short wait is normal.

Replace the joint sand

Washing removes the sand, so fresh silica sand goes back in before sealing. One Jacksonville company lists colored sand as an upgrade. Full joints give the sealer something to lock in. If the joints were low for years, the contractor may fill them twice.

Apply the first coat by spray and back-roll

Application is typically sprayed on, then back-rolled, per one manufacturer's bulletin. How much sealer a surface takes depends on its type, age, condition and porosity, so the contractor watches how fast it soaks in. The slit foam roller then evens out the coat. The goal is an even coat with no pooling in the joints. Shaded corners are checked for pooling before the roller moves on.

Apply the next coat and stay off

Many companies apply two coats. Walking is usually fine after a few hours, and parking waits about a day. Companies commonly quote two to five years between coats, and the bead test shows when it is time again. Ask for product names and the coat count in writing, and keep them for next time.

Services

Complete paver services in Longwood

A Longwood job runs through five steps: check, wash, re-sand, dry and seal. The check covers old sealer and lifted spots, and the wash clears weeds and green film. Fresh sand fills the joints, and the surface dries before any sealer goes on. To hear the plan and product list for your lot, call (689) 356-0104.

Water-based and solvent-based are the two main sealer bases, and film-forming and penetrating are two ways a sealer works. A Jacksonville company says wet look is film-forming and natural or matte is penetrating. Ask which one the contractor plans to use and why. Tell them what you want when you ask for a free quote.

Joint sand and coats matter as much as the sealer. Companies use fine silica sand, and some offer colored sand as an upgrade. One Central Florida company applies two coats and another counts two to three. Ask for the count in writing, and call (689) 356-0104 if you want to compare.

Timing follows the dry surface rule. Sealer needs a dry surface, and Orlando's rainy season runs from May to late October. The dry months from November through April give more open days. For a date that fits your street, ask for a free quote.

Questions to ask before you hire

  • How do chlorine and salt water from my pool affect the sealer on the deck?
  • Will you reset the pavers that tree roots have pushed up before the sealer goes on?
  • Can you list the wash, the joint sand, the sealer and the labor as separate lines on the quote?
  • What is the plan if you find cracked or loose pavers while you are cleaning?
  • How many dry days do my pavers need before you arrive?
  • Can the sealer go on around my gate, the mailbox pavers and the strip along my curb?
  • My pavers are twenty years old and the color has gone gray. Is sealing still worth it?
Photos

What do sealed pavers look like around Longwood?

Wide freshly sealed herringbone paver driveway at a split-level home under a live oak near Longwood
Family on lounge chairs by a sealed gray paver pool deck with a spa near Longwood
Sealed paver patio with wicker chairs beside a screened porch and a lake view near Longwood
Sealed paver walkway curving through azalea beds to a brick front entry near Longwood
Close view of new concrete pavers after sealing near Longwood
Paver driveway with one cleaned half beside a stained half near Longwood
Contractor rinsing a paver driveway with a pressure washer near Longwood
Two contractors spraying and rolling sealer on a driveway near Longwood
Contractor talking through a paver sealing estimate with a homeowner in Longwood
Local

Why local matters in Longwood

A local contractor can explain which products suit Longwood's range of homes, from land platted in 1927 to subdivisions of the late 1960s. That includes what to ask about an old coat. Someone working from a script may skip the question. To reach a local contractor, call (689) 356-0104.

Weather affects product choice and timing here. Orlando's rainy season runs from May to late October, and sealer needs a dry surface. A local contractor knows how long your lot takes to dry after storms. You can ask for a free quote and ask how the schedule would work.

Growth matters too. Longwood became a mostly residential city, and the Census estimate puts it at 17,089 residents in 2024. New neighbors often ask the same things, such as what to put on new pavers, when, and what it costs. Call (689) 356-0104 and ask those questions with no obligation to hire anyone.

Local roots

Why do Longwood homes come from so many different decades?

Because Longwood grew in waves. By 1959 it had slightly more than 1,000 residents inside a city about one mile square, and Longwood Elementary opened in 1960. Military families from Naval Air Station Sanford and the Orlando air bases rented and bought homes around it. Near the Longwood Historic District or the SunRail station, ask for a free quote and name your street.

Longwood Slade Airport once sat west of the city, north of State Road 434, until tract housing for The Woodlands replaced it in the late 1960s. The closure of Naval Air Station Sanford in 1968 and McCoy Air Force Base in 1975 did not stop growth, and Longwood became mostly a home community. Landmarks such as the Longwood Hotel and the Bradlee-McIntyre House mark the older core, so call (689) 356-0104 with your address.

Questions

Frequently Asked Questions

What do professionals use to seal pavers in Longwood?

Most use an acrylic sealer, either water-based or solvent-based, in a matte, semi-gloss or wet look finish. Application is typically sprayed on, then back-rolled, per one manufacturer's bulletin. Fresh silica sand goes in the joints first, and many companies apply two coats. Ask the contractor to name each product so you can read the label yourself.

How much is paver sealing in Longwood?

The Orlando-area range is $1.50 to $3.00 per square foot to clean, sand and seal. A Longwood total depends on area, stains, old sealer and the number of coats. Ask for the square footage and product in the quote so you can compare. A written quote with those items listed is easy to compare.

How often do you seal pavers in Longwood?

The span most companies quote is two to five years between coats. One Florida company says brick pavers are commonly resealed every two to three years, and a Jacksonville company puts film-forming sealer at three to five years in its area. A bead test on the pavers you have gives the plainest answer.

How long does a wet look coat last on a Longwood driveway?

It can wear sooner in the tire lanes, since a Jacksonville company says a wet look shows wear there. Plan on the shorter end of two to five years if the drive is used daily. A semi-gloss or matte finish may hide scuffs longer. A sample patch in a tire lane shows how the finish looks after a few weeks.

Why is paver sealing so expensive in Longwood?

The price covers more than the sealer. A Central Florida company lists weed treatment, pressure cleaning, joint stabilization and two to three coats of sealer, and old sealer or heavy stains add work. Read two quotes side by side, item by item, against the $1.50 to $3.00 range.

What happens if pavers are not sealed in Longwood?

Nothing breaks, but the surface ages faster. A Jacksonville company counts fade, weeds, shade mildew and set-in stains over three to seven unsealed years. Upkeep now is cheaper than a restoration later, going by the same company. Sealing slows that wear, though it does not stop it.

Should new pavers in Longwood be sealed right away?

Usually not. Usually not, because a Jacksonville company advises 30 to 60 days between installation and the first coat while efflorescence works out. Ask the installer when the pavers went in, then tell the contractor so the first coat is timed well.

What is the difference between matte and wet look sealer in Longwood?

A wet look deepens color and adds shine but shows scuffs sooner. Matte stays quiet and, according to one Jacksonville company, penetrates and breathes. Semi-gloss sits between them. Ask for a sample patch if you cannot decide.

Do Longwood pavers need two coats of sealer?

Many companies apply two, and one Central Florida company counts two to three. A sealer maker says porous or older pavers may absorb more sealer, which changes how far a gallon goes. Ask the contractor how many coats your pavers need and why. Two thin coats are easier to keep even than one heavy one.

Can new sealer go over an old coat on Longwood pavers?

It depends on the base already there, since water-based and solvent-based sealers do not stack. Identifying the existing sealer comes first, and the contractor does that at the estimate. Old paperwork or a product label, if you have one, saves a guess. Spills and rinse water from a sealed surface also clean up more easily.

Is a penetrating sealer better than a film-forming sealer in Longwood?

Neither wins every time. A Jacksonville company says penetrating sealer is breathable and safest near pools, while film-forming sealer gives the deeper wet look. It puts penetrating coats at five to seven years in its area. Ask the contractor which suits your pavers and how you use them.

Will sealing change the color of my Longwood pavers?

It can. A Central Florida company says sealer enhances color, and darker pavers benefit most. A wet look deepens color the most, semi-gloss enriches it, and matte changes little. Ask for a sample patch so you can see the result before the whole job.

Ready for a Free Estimate in Longwood?

Call (689) 356-0104 and tell us about your pavers.

Call (689) 356-0104

Free, no obligation