Click To Call(689) 356-0104Click To Get A Free Estimate
Sealed paver driveway at a single story home with a live oak in the front yard

Deeper color, packed joints and easier upkeep

Paver Sealing in Altamonte Springs, FL

Call (689) 356-0104 for a free paver sealing estimate at your Altamonte Springs home.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 356-0104

Who can seal pavers at my Altamonte Springs home?

A local contractor can seal your pavers in Altamonte Springs, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, and booking is up to you. To begin, call (689) 356-0104.

Sealing deepens paver color, helps hold joint sand in place and makes dirt and algae easier to rinse off. Think of the walkway to your front door after a long humid summer, gray along the edges and sandy at the seams, turned dark and even again. Tires and oil wear a driveway, while splash and bare feet wear a pool deck, so every area gets its own plan. Explain how you use each area when you ask for a free quote.

Call (689) 356-0104

Contractor spraying sealer on a brick paver driveway while a helper rolls it smooth
What's included

What is included when pavers are sealed in Altamonte Springs?

Plan on four parts: a walk-through, a wash, packed joints and the sealer coat. Washing and prep take the most time. To walk through them for your own home, call (689) 356-0104.

Walk-through

Square footage, sunken spots, loose pavers, old sealer and standing water get noted before a price is set.

Treat and wash

Algae and weeds are treated first, then a low-pressure wash lifts the dirt without blasting out the sand.

Joint sand

Sand is swept in and wet down so it compacts, which locks the pavers together and leaves weeds less room.

Sealer coat

The sealer goes on fully dry pavers in even passes, at the coverage the product label calls for.

How can I tell my pavers need sealing?

Look for color gone chalky, joints sitting below the paver edges, sand spread across the driveway after a storm and water that soaks in instead of beading. An Orlando paver company says full-sun driveways may need a new coat about every two years. Adding sand early is cheaper than resetting pavers once they have moved. For a quick opinion, call (689) 356-0104.

Which sealer works in Central Florida humidity?

Ask the contractor which product goes on your pavers and why. A Central Florida sealing company calls water-based sealer the Florida standard, because it lets moisture escape and avoids white hazing in humidity that tops 80 percent. It says solvent-based sealer can turn white and peel here, and that cheap sealers can break down in 6 to 12 months of sun. To compare options for your pavers, call (689) 356-0104.

Two other families matter. Unilock says brick and natural stone absorb sealer at different rates, so the product has to suit the material. An Orlando paver company prices natural stone sealing at $2.00 to $3.50 per square foot because it needs a specialized impregnating sealer. Bring up the material when you ask for a free quote.

Wet look or matte: which finish suits my home?

Choose a wet look for dark, glossy color, or a matte finish for the look the pavers had on day one. Around a screened pool, footing counts more than shine, since Unilock says a high gloss can be slippery when wet and a penetrating matte option keeps more traction. Ask to see both on a spare paver when you ask for a free quote.

How often should pavers be resealed in Altamonte Springs?

Expect two to four years from a coat, which is the span an Orlando paver company gives. Full-sun driveways sit near two and shaded decks with light traffic near four, and the same company suggests a cleaning every 12 to 15 months to stretch the coat. Unilock says many owners reapply every three to five years. To have your coat checked, call (689) 356-0104.

Do extra coats of sealer protect pavers longer?

No. Unilock links extra layers to uneven gloss and a whitish film, and it says to seal in one session so no spot gets two layers. A Central Florida company applies two to three coats as part of a full system, so the number on a quote matters less than how thin and even each coat is. If a bid sells extra coats as extra protection, ask why before you ask for a free quote.

When is the right time to seal pavers in Altamonte Springs?

Pick a dry stretch. Unilock asks for 24 to 48 hours of clear weather before and after the coat, and a temperature between 50 and 90 degrees, with 75 the sweet spot. Summer storms in Seminole County can push a date back a day or two, and pavers that sat in shade may need about a day to dry. To pick a day that suits the forecast, call (689) 356-0104.

Sprinklers matter too. Unilock says to keep them off while sealer cures, and Seminole County limits watering to set days. Homes on reclaimed water irrigate twice a week all year, so the contractor can line the job up between those days. New pavers have to wait 60 to 90 days for efflorescence to clear. Mention your install date when you ask for a free quote.

Can sealing fix pavers that have sunk or spread apart?

No. Sealer cannot lift a sunken paver or close a wide joint. Unilock says sealing is not a cure for poor drainage or subbase problems, so pavers that rock under a car or hold a puddle need their base repaired first. Ask if leveling is built into the price or billed separately when you ask for a free quote.

Surfaces

Which areas around an Altamonte Springs home can be sealed?

Driveways, pool decks, patios and front walks can all take a coat. Wear differs from surface to surface, so each area needs its own plan. A Central Florida company warns that sealing only part of a connected area lets weeds and algae spread into the sealed section. To begin with the area that worries you most, ask for a free quote.

Driveways

Tires, oil drips and afternoon sun hit the driveway first. Sealing here counts most where cars turn and joints work loose.

Screened pool decks

Splash water, chlorine and bare feet wear on pool pavers every day. Sealing a deck should leave the surface with good footing.

Lakeside and shaded patios

A back patio under oaks or near a lake stays damp and catches leaves. Those spots usually take the most scrubbing.

Front walks and entries

Entry walks collect soil, mulch and drips from planters by the door. Sealing the front walk is a small job, yet it is the first surface a guest steps on.

Common problems

What causes paver trouble in Altamonte Springs?

Five problems come up again and again: storm sand loss, orange sprinkler streaks, green film in shade, fading in full sun and failed old sealer. Each one costs less to handle early. To sort out which of these your pavers have, call (689) 356-0104.

1. Afternoon storms and lost sand

Orlando gets over 50 inches of rain a year, according to a local paver company, and summer storms arrive most afternoons. Heavy rain carries sand out of the joints, and pavers start to shift once the gaps run low.

2. Orange streaks from irrigation

UF/IFAS says most Florida well water is high in iron, and orange streaks on buildings often follow irrigation with it. Streaks near sprinkler heads need a rust treatment before any coat goes on.

3. Green film on shaded patios

A Central Florida sealing company says covered or partly shaded patios collect more mold and algae. Under oaks or a screen cage, the film comes back sooner.

4. Fading on open driveways

A driveway with no shade takes sun from morning to evening, and an Orlando paver company puts a reseal near every two years there. Chalky color is the first sign.

5. Old sealer that turned cloudy

A Central Florida company says solvent-based sealer can turn white and peel in humid weather. Failed sealer has to come off first, which usually adds $500 to $1,000 or more.

Pricing

What does paver sealing cost in Altamonte Springs?

Orlando-area companies publish $1.50 to $3.00 per square foot to clean, sand and seal, and one Central Florida company lists driveways at $1.50 to $2.50 and pool decks at $1.75 to $3.00. Bigger jobs often cost less per foot, since setup time stays the same. A $1,000 project minimum is common, so a small patio can price near that floor. For a number written for your home, ask for a free quote.

Condition moves the price too. Weeds, algae and efflorescence add prep time, and stripping failed sealer usually adds $500 to $1,000 or more. An Orlando company lists strip and reseal at $3.50 to $5.00 per square foot. Holding a bid already? Call (689) 356-0104 and compare it with these ranges.

Looking for a wash alone? Paver cleaning and joint sand has the details, and the service areas page lists every town covered. Or return to paver sealing in Altamonte Springs.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$450 to $900
600 sq ftTwo car driveway$900 to $1,800
1,000 sq ftLarge driveway or pool deck$1,500 to $3,000
1,500 sq ftDriveway plus pool deck$2,250 to $4,500

Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Gray paver pool deck and spa inside a screen cage with a lake beyond the lawn
Why choose us

Why hire a contractor who works in Altamonte Springs?

A contractor who works near I-4 and State Road 436 already plans for afternoon storms and sprinkler days. Expect the price on paper, with the final call left to you. To begin, call (689) 356-0104.

Contractors who work around here

A company that covers Altamonte Springs already plans for afternoon storms and sprinkler schedules. The first visit goes smoother for that.

A free look, nothing owed

The visit and the estimate cost nothing. If the number does not fit your budget, thank the contractor and move on.

Numbers you can check

Orlando-area companies post their price per square foot, and this site lays those ranges out in plain figures. If a quote lands well outside those ranges, ask why.

You decide the pace

Get the price in writing and read it twice. Read the contractor standards page for what to confirm before you sign.

Ready for a free paver sealing estimate in Altamonte Springs?

Phone or fill in the short form, and expect a local reply within 1 business day, usually much sooner.

Call (689) 356-0104

Free, no obligation

Gloved hand sweeping sand into the seams of freshly cleaned pavers beside a mossy edge
Photos

How do Altamonte Springs pavers look after a fresh seal?

Wide freshly sealed herringbone paver driveway at a split-level home under a live oak at an Altamonte Springs home
Family on lounge chairs by a sealed gray paver pool deck with a spa at an Altamonte Springs home
Sealed paver patio with wicker chairs beside a screened porch and a lake view at an Altamonte Springs home
Sealed paver walkway curving through azalea beds to a brick front entry at an Altamonte Springs home
Close view of new concrete pavers after sealing at an Altamonte Springs home
Paver driveway with one cleaned half beside a stained half at an Altamonte Springs home
Contractor rinsing a paver driveway with a pressure washer at an Altamonte Springs home
Two contractors spraying and rolling sealer on a driveway at an Altamonte Springs home
How it works

How does the paver sealing process work from start to finish?

Most jobs follow the same five steps, from the first walk-around to the final look with you. If you are ready to schedule, call (689) 356-0104.

1. Walk and measure

The contractor walks the pavers and measures the area for the sealing quote. Dips, loose pavers, old sealer and standing water all get noted.

2. Treat and wash

Algae and weeds get a treatment first. A low-pressure wash follows, with a surface cleaner held close to the pavers so the joint sand stays in place.

3. Handle the stains

Rust, oil, leaf marks and white salt film each get a product made for that stain, tried on a small spot before the rest.

4. Pack the joints

Sand is swept in and wet down so it compacts. A second sand pass follows once the pavers have dried.

5. Seal and walk it with you

When sealer is part of the job, it goes on dry pavers with a sprayer and a roller. The contractor then shows you the finished area and how long to keep feet and cars off.

Questions

Frequently Asked Questions

How long does paver sealing last in Florida?

Most coats last two to four years, according to an Orlando paver company. It says a shaded deck with light traffic can reach about four years, while a full-sun driveway with daily cars may need a new coat near two. Unilock puts the usual range at three to five years.

Does a sealing job include cleaning and sanding?

Yes, those three steps are the standard job, and the order matters. The surface is washed first, sand fills the joints next and sealer goes on last, once everything is dry. A Central Florida company adds that cutting corners on prep is a common reason sealer fails.

What are the downsides of sealing pavers?

The main one is the repeat cost, since a coat wears out in a few years. Unilock also lists a possible whitish film from trapped moisture or too much sealer, and a high gloss that can be slippery when wet. Sealing does not fix a drainage or base problem either.

How much is paver sealing in Florida?

Orlando-area companies publish $1.50 to $3.00 per square foot to clean, sand and seal. A 600 square foot Altamonte Springs driveway comes to about $900 to $1,800. Stripping failed sealer and repairs are usually extra.

Is it worth it to seal pavers in Altamonte Springs?

For most homes, yes. Sun fades the color, storms pull sand from the joints and humid air feeds algae, and sealer slows all three. The trade-off is another job in two to four years, so ask what each coat should deliver before you book.

How long should I wait to seal new pavers in Altamonte Springs?

Wait 60 to 90 days, which is Unilock's advice for new pavers. White salt film called efflorescence needs time to fade first, typically two to three months and sometimes up to a year. Sealing over it locks it in.

Will rain or my sprinklers delay sealing in Altamonte Springs?

Yes, both can. Unilock asks for 24 to 48 hours of clear weather before and after the coat and says to keep sprinklers off while it cures. Seminole County sets irrigation days, so the contractor can pick a day that clears yours.

Can pavers inside a screen enclosure in Altamonte Springs be sealed?

Yes. An Orlando paver company says screen enclosures and tight access lengthen a job, so mention the cage when you ask for a price. Ask about traction on a pool deck, since Unilock warns that high gloss can be slippery wet.

How long does a paver sealing job take in Altamonte Springs?

A standard clean, sand and seal usually takes a day, says an Orlando paver company. Stripping an old coat and resealing takes two to three days. Humid or rainy weather can add drying time.

Ask what your Altamonte Springs pavers need next

Name your street and the surface that bothers you, and a contractor responds within 1 business day, usually much sooner.

Call (689) 356-0104

Free, no obligation